GT SERIES
GT25R
Dual Ball Bearing GT25-R Turbo assembly with internal wastegate assembly and
.64 A/R turbine with 5 bolt exit. Very good response turbo for 4 Cyl applications.
This turbo has a flow capacity of about 250HP.
$740.00
GT28R
Dual Ball Bearing GT28R Turbo assembly with internal wastegate assembly. .64ar
turbine with 5 bolt exit. Very good response turbo for 4 Cyl applications.
This turbo has a flow capacity of about 310HP.
$740.00
GT25/40R
Dual Ball Bearing GT25/40-R Turbo assembly with specified ar. T25 style inlet
flange with 5 bolt style exit. Large 60- 1 style compressor housing with 4.00"
inlet and 2.50" outlet. Very good response turbo for 4 Cyl applications.
This turbo has a flow capacity of about 450HP.
$1040.00
GT28RS
Dual Ball Bearing GT28RS turbo assembly with T25 style turbine inlet. Comes
with internal wastegate pre-assembled. This turbo is great for small displacement
engines up to 2.2L and has the ultimate spool up time compared to other units.
This turbo has a flow capacity of about 350HP. This turbo would be comparable
to the HKS GT2530.
$1140.00
GT30R
Dual Ball Bearing GT30R Turbo assembly with T3 style housing with T3 inlet
flange w/ 4 bolt style exit. T04E style compressor housing with 2.75 - 3.00
inlet and 2.00" outlet. Very Good response turbo for 4 Cyl applications.
This turbo has a flow capacity of about 500HP. This turbo would be the same
as HKS GT3037. The GT30R turbine housings with 4 bolt exit are made out of
ductile Ni-Resist iron (has a nickel content of about 38%). This material
is much better at withstanding high exhaust gas temperatures than regular
cast iron. The turbine wheel is inconnel 713 and is good for up to 1700 degrees
farenheit. The wheel can sustain longer operation at higher temperature but
not for long periods of time. You'll make a hell of a lot more power with
this turbo than most turbos comparable!!!
$1310.00
GT35/40R
Dual Ball Bearing GT35/GT40R Turbo assembly. T3 style inlet flange with 4
bolt T31 style exit. Large 60- 1 style compressor housing with 4.00 inlet
and 2.50" outlet. Hi HP 4-6 Cyl applications. This turbo has a flow capacity
of about 600HP.
$1355.00
GT40R
Dual Ball Bearing GT40R Turbo assembly. T4 style inlet flange with 3.00"
V-BAND exit. Large style compressor housing with 4.00" inlet and 2.50"outlet.
Hi-HP 6 Cyl applications good up 700HP+ with great top end power.
$1950.00
T SERIES
T3-60 Trim
T3 series turbocharger 60 trim. 60 Trim T3 with .48.. 250HP 4 Cyl. Standard
T3 4 bolt inlet and T3 5 bolt discharge exhaust
$590.00
T3/T4E .58 45 Trim
T3/T4E Turbo with .58 A/R and 45 Trim Compressor. Good for up to 350HP 4Cyl
Applications with good low end. Standard T3 4 bolt inlet and T3 5 bolt discharge
exhaust
$640.00